Mark was a pleasure to work with. We had an estimate within a day or two of initial contact. The quote was very thorough and provided us options. We ended doing about half of the recommendations (all we could spend at the moment). We were placed on their schedule and were contacted the day before they started. Throughout the process we were updated and they finished today. It was a great experience.

Description of Work

Stone South Side Chimney: Pressure-wash and lightly chemical clean all of chimney, replace bad/cracked stone near the top of the chimney, grind and chip out only bad, open, loose, cracked wider than 1/8″, missing, or crumbled mortar joints to a min. depth of 3/4″, clean, make dust free, slightly wet and re-tuckpoint using an historical mortar mix color and finish to match existing closely, repair/re-surface the chimney crown with new mortar built up in the center sloping down to edges so water properly sheds off, cut out and re-caulk/seal flashing and paint flashing color to match existing closely, caulk sides of the chimney vertical joints to house, final clean new repairs, and apply Weather Seal Siloxane PD 10 Year Clear Water Repellent. Stone Front Foundation on House: Clean as above, backer rod and caulk sides of stone wall to stucco so it’s water-tight, caulk stone butt joints on water table/cap of wall and rub sand in it to make it look as a mortar joint and this allows movement in the future, spot-tuckpoint mortar joints as above as well and final clean wall and cap.